hifi engine

Manual Library / Sansui

Sansui G-9000

Pure Power DC Stereo Receiver (1978-79)

add a review add a review

Sansui G-9000


Tuning range: FM, MW

Power output: 160 watts per channel into 8Ω (stereo)

Frequency response: 5Hz to 50kHz

Total harmonic distortion: 0.03%

Damping factor: 60

Input sensitivity: 6mV (mic), 2.5mV (MM), 150mV (DIN), 150mV (line)

Signal to noise ratio: 78dB (MM), 95dB (line)

Channel separation: 60dB (MM), 70dB (line)

Output: 150mV (line), 43mV (DIN), 1V (Pre out)

Speaker load impedance: 4Ω to 8Ω

Semiconductors: 116 x transistors, 72 x diodes, 13 x FET, 9 x IC, 10 x LED, 1 x photo coupler

Dimensions: 560 x 201 x 495mm

Weight: 26.9kg

Finish: simulated walnut grain


service manual   English -

brochure   English - ricardolopes.br

Related Catalogues


If you have any problems opening files please read the download FAQ. All files are provided under strict licence and reproduction without prior permission or for financial gain is strictly prohibited.

If you have additional documentation please consider donating a copy to our free archive.


re: G-9000

My Sansui G-9000 needs technical services. The left side out speakers channel goes on/off. Is there a recommended place where can do a complete cleaning, checking and tune up of the Sansui G-9000? Thanks

re: G-9000

Check rotary selectors : tape/monitor and source selector, both on the same board (f-2795). to spray deoxide you have to remove the board to get the clear sprays.
in order to remove the board, you have to remove front panel first, than 2 lock nuts on rotary selector and 2 screws on 4ch. adaptor switch...than go to the bottom chassis remove couple screws, plugs.. ..good luck !

re: G-9000

First of all:
at the left side (external case), there is a connection key (preamplifier/amplifier). Spray a deoxidante liquid and move the key back and forward (you´ll have to remove a transparent plastic). Do it unplugged.

Difference between this and the 9000DB?

I have a DB version in need of a serious cleaning and light bulb replacement and ask if this schematic will be ok?

Looking for Sansui g9000 users manual

surprised there is not one posted here.

Thanks in advance for your help.
Make a great day.

G 9000 user manual needed

I need a users manual for the G 9000 anyone have one?


I have been looking for this manual for forever. I have owned my g-9000 since 1982 and love it.

thanks for your support

iam thanking u from the bottom of my heart for the service manual provided by u i own a rotel RMB 1095 POWER BLOCK which is not working ur manual is of great help to me

thanking u


This website is not affiliated with or sponsored by Sansui. To purchase G-9000 spares or accessories, please contact the company via their website or visit an authorised retailer.