hifi engine

Manual Library / Sansui

Sansui QRX-5001

Four Channel Receiver (1976)

add a review add a review

Sansui QRX-5001


Tuning range: FM, MW

Power output: 17W/ch into 8Ω (quadraphonic)

Frequency response: 30Hz to 30kHz

Total harmonic distortion: 0.5%

Damping factor: 10

Input sensitivity: 2.5mV (MM), 100mV (DIN), 100mV (line)

Signal to noise ratio: 60dB (MM), 70dB (line)

Channel separation: 45dB (MM), 45dB (line)

Output: 100mV (line), 30mV (DIN)

Speaker load impedance: 8Ω (minimum)

Semiconductors: 90 x transistors, 9 x FET, 34 x diodes, 3 x zener diodes, 13 x IC

Dimensions: 480 x 135 x 327mm

Weight: 13.8kg


service manual   English - Ivy Caudieus

brochure   English - Jeepo65

If you have any problems opening files please read the download FAQ. All files are provided under strict licence and reproduction without prior permission or for financial gain is strictly prohibited.

If you have additional documentation please consider donating a copy to our free archive.


This website is not affiliated with or sponsored by Sansui. To purchase QRX-5001 spares or accessories, please contact the company via their website or visit an authorised retailer.