hifi engine

Manual Library / Sansui

Sansui QRX-8001

Four Channel Receiver (1976-77)

add a review add a review

Sansui QRX-8001


Tuning range: FM, MW

Power output: 100W/ch (stereo), 40W/ch into 8Ω (quadraphonic)

Frequency response: 20Hz to 20kHz

Total harmonic distortion: 0.3%

Damping factor: 30

Input sensitivity: 4mV (mic), 2.5mV (MM), 100mV (DIN), 100mV (line)

Signal to noise ratio: 70dB (MM), 80dB (DIN), 80dB (line)

Channel separation: 45dB (MM), 45dB (line)

Output: 100mV (line), 30mV (DIN)

Speaker load impedance: 4Ω to 8Ω

Dimensions: 600 x 174 x 415mm

Weight: 23.6kg


service manual   English -

instruction/owners manual   English - sbirov

If you have any problems opening files please read the download FAQ. All files are provided under strict licence and reproduction without prior permission or for financial gain is strictly prohibited.

If you have additional documentation please consider donating a copy to our free archive.


skydog2112's picture

Owners manual

Does anybody have access to QRX-8001 owners manual,I'll gladly make it worth your while.

Sansui QRX-8001 owner manual

did you ever get one? I could use one also.

I just bought a mint qrx-8001

I just bought a mint qrx-8001 from an electronics repair store. It was pricey but worth it. There is an operating manual that came with it. I just registered on this site to find a service manual for my 9090db where the protector light is blinking. Do you just want a copy of the manual? You can also try ebay because they sell reproduce manuals there.

Sansui QRX-8001 owner manual

Hello, I would be interested in a owners operator manual also. Thank you

This website is not affiliated with or sponsored by Sansui. To purchase QRX-8001 spares or accessories, please contact the company via their website or visit an authorised retailer.