hifi engine

Manual Library / Sansui

Sansui RA-1000

Reverberation Amplifier (1987)

add a review add a review

Sansui RA-1000


What really gives music that you-are-there realism is the amount of echo or reverb you hear in the sound.

A larger amount of echo can make you feel like you're sitting in a big hall or cathedral - smaller amounts create a discotheque like environment.

Add echo to the sound from your videos, and you've got your own movie house; right in the home.

The Sansui RA-1000 gives all the concert halt realism you need, plus more.

You can make a solo artist sound like a duo, mix voice or guitar with the program of your choice, and record the mix on a connected tape deck, all with echo.

Because we use an electronic BBD reverb unit, reverb is natural and noise extremely low.

For enhanced sense of realism (or just for fun), there's nothing like the Sansui RA-1000.


Frequency response: 10Hz to 80kHz (line)

Total harmonic distortion: 0.025%

Input sensitivity: 0.5mV (mic), 150mV (line)

Output voltage: 150mV

Signal to noise ratio: 80dB (mic), 95dB (line)

Reverberation time: 0 to 4.5s (echo), 30 to 200ms (duet)

Dimensions: 430 x 112 x 265mm

Weight: 3.8kg


flyer   English - sondurum

brochure   English - MAN3377

Related Catalogues


If you have any problems opening files please read the download FAQ. All files are provided under strict licence and reproduction without prior permission or for financial gain is strictly prohibited.

If you have additional documentation please consider donating a copy to our free archive.


This website is not affiliated with or sponsored by Sansui. To purchase RA-1000 spares or accessories, please contact the company via their website or visit an authorised retailer.