Sentec PA 8
Stereo Power Amplifier
The Sentec PA 8 is an 80W stereo power amplifier with peak level indicator, designed for use with the SC 8 stereo pre-amplifier
Power output: 70 watts per channel into 8Ω (stereo)
Frequency response: 3Hz to 200kHz
Total harmonic distortion: 0.02%
Damping factor: 100
Input sensitivity: 1.4V
Signal to noise ratio: 110dB
Speaker load impedance: 4Ω (minimum)
Dimensions: 450 x 68 x 190mm
If you have any problems opening files please read the download FAQ. All files are provided under strict licence and reproduction without prior permission or for financial gain is strictly prohibited.
If you have additional documentation please consider donating a copy to our free archive.