hifi engine

Manual Library / Sentec

Sentec SCA-1

Rack Mountable Pre Amplifier

High quality preamp with 2 line inputs, 2 pre-outs, 2 tape loops and a MM/MC phono stage. Designed for use with the ACM1 monoblock power amplifiers.

add a review add a review

Sentec SCA-1


The Sentec SCA-1 preamplifier was conceived and designed for audio perfectionists.

This component represents five years of research in audible effects of various transistor topologies.

Through careful listening tests and technical analysis it has progressively become the SCA-1


Frequency response: 3Hz to 300kHz

Input sensitivity: 0.26mV (MC), 2.6mV (MM), 140mV (line)

Signal to noise ratio: 80dB (MC), 90dB (MM), 100dB (line)

Output: 1.4V (Pre out), 4V (Pre out Max)

Semiconductors: 39 x transistors, 6 x IC

Dimensions: 483 x 44 x 205mm

Weight: 2.1kg


instruction/owners manual   English -

flyer   Svenska -

If you have any problems opening files please read the download FAQ. All files are provided under strict licence and reproduction without prior permission or for financial gain is strictly prohibited.

If you have additional documentation please consider donating a copy to our free archive.


This website is not affiliated with or sponsored by Sentec. To purchase SCA-1 spares or accessories, please contact the company via their website or visit an authorised retailer.