hifi engine

Manual Library / Sherwood

Sherwood S-2730

Optimum Digital Receiver

add a review add a review

Sherwood S-2730


Tuning range: FM, MW

Power output: 35 watts per channel into 8Ω (stereo)

Frequency response: 5Hz to 40kHz

Total harmonic distortion: 0.2%

Damping factor: 40

Input sensitivity: 2.5mV (MM), 150mV (line)

Signal to noise ratio: 65dB (MM), 90dB (line)

Channel separation: 50dB (line)

Dimensions: 440 x 109 x 235mm

Weight: 5.4kg


service manual   English - Ivy Caudieus

If you have any problems opening files please read the download FAQ. All files are provided under strict licence and reproduction without prior permission or for financial gain is strictly prohibited.

If you have additional documentation please consider donating a copy to our free archive.


re: S-2730

Does anyone have a manual on how to wire speakers to the SHERWOOD S-2730 CP AM FM RECEIVER?

re: S-2730

Press the lever and push the bare wire in, speaker + to the red terminal and - to the black terminal. Sockets marked R are for the right channel, L for the left. If you want to connect a second (stereo) pair of speakers (eg for another room) you can connect them to the lower sockets marked B, which are normally switched from the front panel.

This website is not affiliated with or sponsored by Sherwood. To purchase S-2730 spares or accessories, please contact the company via their website or visit an authorised retailer.