hifi engine

Manual Library / Sony

Sony STR-7065

AM/FM Stereo Receiver (1972)

add a review (1 review)

Sony STR-7065


Tuning range: FM, MW

Power output: 60 watts per channel into 8Ω (stereo)

Frequency response: 10Hz to 100kHz

Total harmonic distortion: 0.2%

Damping factor: 50

Input sensitivity: 1mV (mic), 2mV (MM), 150mV (line)

Signal to noise ratio: 65dB (mic), 74dB (MM), 90dB (line)

Output: 250mV (line), 30mV (DIN), 1V (Pre out)

Speaker load impedance: 4Ω to 16Ω

Dimensions: 471 x 157 x 375mm

Weight: 15.2kg

Year: 1972


service manual (partial)  English - dirty_spoon

instruction/owners manual   English - dsivie

If you have any problems opening files please read the download FAQ. All files are provided under strict licence and reproduction without prior permission or for financial gain is strictly prohibited.

If you have additional documentation please consider donating a copy to our free archive.


 Login or register to post reviews

Reviewed Mar 01st, 2015 by thalbouty

This is being reviewed from the vantage point of a classic receiver from the golden age of the mid 70s. This was Sony's top of the line receiver capable of delivering well over 60 watts per channel both channels driven 20-20,000 Hz, in compliance with FTC standards. I own one and have validated the power output numerous times. The FM tuner is based on a 4 gang condenser and has held alignment over the years. The receiver is physically much smaller than comparable Pioneer, Sansui and Marantz receivers of the day. Styling is clean and classic with good feature sets and few gimmicks. The sound quality is very good, with excellent dynamics and a bit more inner detail than my Marantz 2270 which is quite good itself. The phono section is a good performer but lacks adjustments for loading.



This website is not affiliated with or sponsored by Sony. To purchase STR-7065 spares or accessories, please contact the company via their website or visit an authorised retailer.