Stereo Integrated Amplifier (1976-78)
Power output: 55 watts per channel into 8Ω (stereo)
Frequency response: 10Hz to 100kHz
Total harmonic distortion: 0.1%
Damping factor: 35
Input sensitivity: 2.5mV (MM), 150mV (line)
Signal to noise ratio: 70dB (MM), 90dB (line)
Output: 150mV (line), 17mV (DIN), 1V (Pre out)
Semiconductors: 4 x FET, 43 x transistors, 27 x diodes
Dimensions: 460 x 170 x 325mm
If you have any problems opening files please read the download FAQ. All files are provided under strict licence and reproduction without prior permission or for financial gain is strictly prohibited.
If you have additional documentation please consider donating a copy to our free archive.
Reviewed Mar 05th, 2015 by Simon Spiers
On a purley technical note this amp will more than likely need recapping in the power amp section. As it's direct coupled leaky caps may result in high dc offset at the speakers and intermitent protection activation. Main resivoir cap is a two section affair making replacment different.
Amplifier does sound good and is very well built. Also has pre out power in jacks.