Stereo Preamplifier (1993-94)
Frequency response: 20Hz to 20kHz
Total harmonic distortion: 0.003%
Input sensitivity: 0.2mV (MC), 4mV (MM), 250mV (line)
Signal to noise ratio: 92dB (MC), 110dB (line)
Channel separation: 120dB (line)
Output: 375mV (line), 1.25V (Pre out), 10V (Pre out Max)
Dimensions: 470 x 135 x 420mm
There are currently no manuals available to download for the TA-ER1ES.
If you have any documentation for this model, for example owners manual, service manual, brochure, advert etc, please consider donating a copy to our free archive.
If you have any problems opening files please read the download FAQ. All files are provided under strict licence and reproduction without prior permission or for financial gain is strictly prohibited.
Reviewed Oct 18th, 2016 by Lefurules
Great pre amp with which you can drive any poweramp with XLR and RCA(cinch) inputs. Also has an inverted xlr ouputs to drive (japan) XLR inputs with changed HOT/COLD pins. The specs are still above any new pre amp. The sound is awesome ture Hi end style. Has one of the best MC/MM phone inputs. The MC has a built in step-up trans so it really fits a wide range of MC cartridges. Has a separate input for MM. no messing around with changing cables if you have a two tonearm record player.
it has all inputs dead silent the ones that are not used are grounded (no RFI no humming) . the only active input is the one you pick.
to me that is the ultimate preamp. It is very rare item on the second hand market just like any product that is made to last and perform tip top at any time.
I drive my TANR10 monural amps with this pre amp. Speakers DIY DTQWT MKII. Just need a good source and you reach the nirvana of sound.
Sony claims they made only 100 units with 230v and the same amount for 100v.