Stereo Integrated Amplifier (1981)
Power output: 50 watts per channel into 8Ω (stereo)
Frequency response: 5Hz to 70kHz
Total harmonic distortion: 0.008%
Damping factor: 50
Input sensitivity: 0.17mV (MC), 2.5mV (MM), 150mV (line)
Signal to noise ratio: 75dB (MC), 90dB (MM), 104dB (line)
Output: 150mV (line)
Speaker load impedance: 8Ω to 16Ω
Dimensions: 430 x 80 x 335mm
If you have any problems opening files please read the download FAQ. All files are provided under strict licence and reproduction without prior permission or for financial gain is strictly prohibited.
If you have additional documentation please consider donating a copy to our free archive.
Reviewed Oct 08th, 2012 by Smoke Screen
A good slimline amp with enough juice and a good
phono mm/mc stage. The used componentry is sadly
only industry standart so it ages quicker and
leads to defects over the decades. Numerous F45
have died of defective parts in the switching
power supply. Still a worthy piece for an overhaul.
Better than Kenwoods KA-80.