Integrated Stereo Amplifier (1988)
Power output: 80 watts per channel into 8Ω (stereo)
Frequency response: 2Hz to 200kHz
Total harmonic distortion: 0.003%
Damping factor: 50
Input sensitivity: 0.17mV (MC), 2.5mV (MM), 150mV (line)
Signal to noise ratio: 68dB (MC), 86dB (MM), 105dB (line)
Output: 150mV (line)
Dimensions: 430 x 148 x 373mm
If you have any problems opening files please read the download FAQ. All files are provided under strict licence and reproduction without prior permission or for financial gain is strictly prohibited.
If you have additional documentation please consider donating a copy to our free archive.
Reviewed Nov 16th, 2012 by Smoke Screen
Good sounding little ES-Amp from the pre-MOSFET
era. The phonostage is good,but a step-down from
earlier non-ES Amps. Cheap pots.