Stereo Integrated Amplifier (1995-96)
Power output: 70 watts per channel into 8Ω (stereo)
Frequency response: 5Hz to 100kHz
Total harmonic distortion: 0.008%
Damping factor: 100
Input sensitivity: 0.17mV (MC), 2.5mV (MM), 150mV (line)
Signal to noise ratio: 77dB (MC), 95dB (MM), 105dB (line)
Output: 150mV (line)
Speaker load impedance: 4Ω to 16Ω
Dimensions: 430 x 135 x 375mm
Accessories: RM-S702 remote control
If you have any problems opening files please read the download FAQ. All files are provided under strict licence and reproduction without prior permission or for financial gain is strictly prohibited.
If you have additional documentation please consider donating a copy to our free archive.
Reviewed Sep 29th, 2016 by coolsc21
ES models are produced in very high quality. Carefully measured components. These amplifiers are second to none.
Reviewed May 19th, 2013 by Smoke Screen
This is just a considerably slimmed F5xxxES amp with
revised internal structuring and new faceplate design.
Consequently the price/value ratio is noticeable bader than
older models. Nevertheless this is a solid build good
quality amp,but also quite expensive (new) for what it
delivers. If you look for a basic ES amp,the older F505
or F590 models are the better choice.