hifi engine

Manual Library / Soundcraftsmen

Soundcraftsmen RP2212

Stereo Graphic Equalizer

add a review add a review

Soundcraftsmen RP2212


Soundcraftsmen welcomes you to the fascinating world of perfectly balanced audio reproduction, and we hope you will enjoy your experiences in expanding the capabilities of your stereo system, as much as we have enjoyed designing and developing the unit that makes possible this further expansion of your listening enjoyment.

The RP2212 equalizer may be used with receivers, integrated amplifiers, and separate preamplifiers and amplifiers.

It is designed to be connected to those inputs and outputs which are normally involved with the operation of a tape recorder (the Tape Monitor circuit)..


Input Sensitivity: 1V (3V max)

Output Level: 1V (6V max)

Gain: ± 0dB

Frequency response: 10Hz to 50kHz

Signal to Noise Ratio: 91dB

Total harmonic distortion: 0.1%

Control Range: ± 12dB

Frequency Bands: 30, 60, 120, 240, 480, 960, 1.9K, 3.8K, 7.6K, 15KHz


instruction/owners manual   English - Arpad1Rozsa

schematics   English - Arpad1Rozsa

If you have any problems opening files please read the download FAQ. All files are provided under strict licence and reproduction without prior permission or for financial gain is strictly prohibited.

If you have additional documentation please consider donating a copy to our free archive.


This website is not affiliated with or sponsored by Soundcraftsmen. To purchase RP2212 spares or accessories, please contact the company via their website or visit an authorised retailer.