Heavyweight Loudspeaker System
The Arden features a 15" HPD 385A driver with Girdacoustic reinforced cone mounted in a real wood veneered particle board cabinet.
The system is front recess mounted to avoid tunnel and diffraction effects.
The HPD integrated drive system consists of a direct radiator bass unit and a high frequency compression driver, both located concentrically within the same frame and magnet assembly.
The Arden is braced internally to reduce spurious resonances which can occur in large panel areas.
Type: 2 way, single driver loudspeaker system
Frequency Response: 30Hz to 20kHz
Power Handling: 85W
Crossover Frequency: 1000Hz
Full Range: 1 x 15" HPD 385A
Enclosure: ducted port
Grille: brown, sand or blue cloth
Finish: walnut, ash, teak
Dimensions: 990 x 660 x 370mm
If you have any problems opening files please read the download FAQ. All files are provided under strict licence and reproduction without prior permission or for financial gain is strictly prohibited.
If you have additional documentation please consider donating a copy to our free archive.
Reviewed Jul 26th, 2014 by robshield
Mine have the later and less popular 3828 driver but are brilliant speakers. Loads of well defined bass (EBS alignment), brilliant imaging and soundstage due to the point source driver. Lower mid can be a bit harsh at times but can be fixed with aftermarket XO. Paid AUD1200 - bargain