2-Track Recorder / Producer (1989)
No matter how elaborate a multichannel tape recorder is, it doesn't do the job without help.
A lot of equipment is involved, and a lot of talent as well.
The recorder becomes the keystone in a system that involves microphones, mixers, loudspeakers, amplifiers and many sophisticated electronic devices.
Everything contributes a part of the system of multichannel recording.
In the Tascam 32 general purpose 2 channel recorder/reproducer we have included the features, circuits and controls necessary for a wide variety of applications.
For example, true stereo remote recording with a minimum amount of extra equipment is made possible by the inclusion of microphone pre-amplifier, pads and headphone amps.
Track system: 2-track, 2-channel, stereo system
Heads: 2 x record/playback, 1 x erase
Motor: 2 x reel, 1 x capstan
Reel size: up to 10.5 inch reel
Equalization: NAB or IEC
Tape speeds: 7 1⁄2 15 ips
Wow and flutter: 0.06% (15 ips)
Frequency response: 40Hz to 22kHz (15 ips)
Signal to Noise Ratio: 68dB
Total harmonic distortion: 0.8%
Input: 300mV (line), 1mV (mic)
Output: 0.3V (line)
Dimensions: 410 x 461 x 256mm
If you have any problems opening files please read the download FAQ. All files are provided under strict licence and reproduction without prior permission or for financial gain is strictly prohibited.
If you have additional documentation please consider donating a copy to our free archive.
Reviewed Mar 08th, 2016 by jimjazzdad
Found it on the curb. $50 for a capstan belt, pinch roller and some VU lamps and a few hours of cleaning and lubricating...and it sounds amazing! I finally have a 2-track to keep the 3340S and the 3300SX company. Manuals found here were a huge help, thanks!
Reviewed Mar 06th, 2012 by dhwebber
Great! Awesome listening to my tapes I recorded in 1978!