Auto Reverse Tape Deck (1972)
The TEAC A-6010GSL features three motors, four solenoid operated, high density ferrite heads (forward, erase, record, playback and reverse playback), and phase sensing signal or foil operated dual system automatic reverse.
The AR-70GSL preamplifier circuits use IC and silicon transistors. Independent circuits are provided for recording, monitoring, VU meter amplifier and playback functions.
Electrical assembly provides two level bias selectors for conventional and low noise/high out tapes, dual scale VU meter, meter level switch for optimum recording accuracy with any type recording tape.
There is full MIC/LINE mixing capability with individual level controls.
Track system: auto reverse, 4-track, 2-channel, stereo/monaural system
Heads: 2 x playback, 1 x record, 1 x erase
Motor: 1 x capstan, 2 x reel
Reel size: up to 7 inch reel
Tape speeds: 3 3⁄4 7 1⁄2 ips
Wow and flutter: 0.06% (7 1⁄2 ips)
Signal to Noise Ratio: 48dB
Input: 100mV (line), 0.25mV (mic)
Output: 0.3V (line)
Semiconductors: 6 x IC, 20 x transistors, 6 x diodes
Dimensions: 443 x 520 x 174mm
If you have any problems opening files please read the download FAQ. All files are provided under strict licence and reproduction without prior permission or for financial gain is strictly prohibited.
If you have additional documentation please consider donating a copy to our free archive.