hifi engine

Manual Library / TEAC


Integrated Stereo Amplifier (2003)

add a review add a review



Power output: 120 watts per channel into 4Ω (stereo)

Frequency response: 5Hz to 80kHz

Total harmonic distortion: 0.02%

Input sensitivity: 2.8mV (MM), 180mV (line)

Signal to noise ratio: 65dB (MM), 90dB (line)

Channel separation: 65dB (line)

Dimensions: 430 x 142 x 355mm

Weight: 9.7kg

Accessories: remote control unit


service manual   English -

Related Catalogues


If you have any problems opening files please read the download FAQ. All files are provided under strict licence and reproduction without prior permission or for financial gain is strictly prohibited.

If you have additional documentation please consider donating a copy to our free archive.


re: A-R600

Cannnot fault this amp. I have encountered a problem recently. My condition dictates that most of the time I am confined to bed. I moved the TEAC into the bedroom. The remote control, although now much closer to the amp. does not respond. I found that if I directed the hand unit directly at the sensor it functioned, but at an angle it doesn't. My situation is that at I am at a 45 degree angle to the amp. when in bed, and at a distance of about 2 metres. I figure that the IR sensor has come back from its correct position. I have yet to take the amp. apart. Will let you know how I get on.
Some of my works can be found on a search for - alan willcox + esr +capacitor and also alan willcox + transistor tester.

Kind regards

Alan Willcox.

This website is not affiliated with or sponsored by TEAC. To purchase A-R600 spares or accessories, please contact the company via their website or visit an authorised retailer.