AM/FM Stereo Receiver
Tuning range: FM, MW
Power output: 36 watts per channel into 8Ω (stereo)
Frequency response: 20Hz to 30kHz
Total harmonic distortion: 0.8%
Damping factor: 80
Input sensitivity: 2mV (MM), 150mV (line)
Signal to noise ratio: 65dB (MM), 70dB (line)
Channel separation: 50dB (MM), 50dB (line)
Output: 150mV (line)
Speaker load impedance: 4Ω to 16Ω
Dimensions: 16-1/4 x 4-3/4 x 14 inches
If you have any problems opening files please read the download FAQ. All files are provided under strict licence and reproduction without prior permission or for financial gain is strictly prohibited.
If you have additional documentation please consider donating a copy to our free archive.
Reviewed Jul 16th, 2016 by ianjones
Expect to send around 50-£70 on new caps and power cord + blubs and around two weeks steady work. It is a fairly easy amp to work with. Once all this is done it is one of the best units I have herd. I serviced a cyrus 2 and compared them the cyrus was not in the same street the teac has bass for fun and very detailed highs it fills the room with high end sound a real peach! BE GENEROUS WITH CAP VALUES.