AM/FM Stereo Receiver (1978-79)
Tuning range: FM, MW
Power output: 25 watts per channel into 8Ω (stereo)
Frequency response: 10Hz to 30kHz
Total harmonic distortion: 0.04%
Damping factor: 32
Input sensitivity: 2.5mV (MM), 180mV (DIN), 150mV (line)
Signal to noise ratio: 78dB (MM), 95dB (line)
Channel separation: 55dB (line)
Output: 150mV (line), 30mV (DIN)
Speaker load impedance: 4Ω to 16Ω
Dimensions: 430 x 142 x 300mm
If you have any problems opening files please read the download FAQ. All files are provided under strict licence and reproduction without prior permission or for financial gain is strictly prohibited.
If you have additional documentation please consider donating a copy to our free archive.
Reviewed Oct 08th, 2016 by telegraph-hill
Had a Technics SA200L in my workshop today and I'm impressed. The UKW FM reception is very good and the Hybrid Amplifier Modules doing a good job. No big problems on the technical side and just a pleasure to listen after a small repair was finished. All Pots are still fine and connectors just need a quick wash with Alcohol. Good Value for price and a recommended entrance receiver for people who want to spend not a fortune on Vintage Hifi. Small downside, the Wooden case vernier is just PVC. See finished picture here: www.hehn.com/bilder/hifi/Technics-SA200.jpg
Reviewed Nov 05th, 2015 by Pablo Alvarez Gomez Omil
This Technics has been my first Receiver in 1980, it is still working although once was repaired to new. I think its sound is fantastic!
Reviewed Apr 10th, 2015 by ARRANPILOT
Excellent receiver. Stereo separation, and quality of the receiver is superb. Not bad for the baby of the series. (Running into KEF C80s).