hifi engine

Manual Library / Technics

Technics SA-T670

AM/FM Stereo Receiver

add a review add a review

Technics SA-T670


Tuning range: FM, MW

Power output: 60 watts per channel into 8Ω (stereo)

Frequency response: 10Hz to 40kHz

Total harmonic distortion: 0.03%

Damping factor: 50

Input sensitivity: 3mV (mic), 2.5mV (MM), 150mV (line)

Signal to noise ratio: 80dB (MM), 92dB (line)

Channel separation: 55dB (line)

Output: 150mV (line), 30mV (DIN)

Speaker load impedance: 4Ω to 16Ω

Dimensions: 450 x 157 x 411mm

Weight: 12.5kg


instruction/owners manual   English - nzrada

service manual   English - froady

If you have any problems opening files please read the download FAQ. All files are provided under strict licence and reproduction without prior permission or for financial gain is strictly prohibited.

If you have additional documentation please consider donating a copy to our free archive.


Technics Pye MAD's picture

re: SA-T670

I have several of these and they are fantastic and i have measured all of them and SA-T670s put out more power than what they're quoted to. Thanks so much for the service manual.

This website is not affiliated with or sponsored by Technics. To purchase SA-T670 spares or accessories, please contact the company via their website or visit an authorised retailer.