Stereo Integrated Amplifier (1976-77)
Power output: 41 watts per channel into 8Ω (stereo)
Frequency response: 20Hz to 20kHz
Total harmonic distortion: 0.2%
Damping factor: 40
Input sensitivity: 2mV (MM), 150mV (line)
Signal to noise ratio: 72dB (MM), 92dB (line)
Output: 150mV (line)
Speaker load impedance: 4Ω to 16Ω
Dimensions: 410 x 140 x 332mm
If you have any problems opening files please read the download FAQ. All files are provided under strict licence and reproduction without prior permission or for financial gain is strictly prohibited.
If you have additional documentation please consider donating a copy to our free archive.
Reviewed Aug 06th, 2015 by Tonybro
I've just been fortunate enough to acquire one of these beauties, boxed with instruction manual, brochure and an ST-7600 Tuner.
It needed the potentiometers cleaning as they were a little oxidised but once done this amp really sings!
Powerful too. I plugged my Triangle Titus e speakers (4 Ohm, 90db/W/m) meaning this little beast was kicking out 50W RMS per Channel and it was really nice. There is a touch of warmth there but no real colouration, plenty of bass with all tone controls flat and no loudness switched in.
I tried with the Tuner, my Linn Axis with Denon DL-110 (HOMC), my phone (mp3) and my PC (24/192 FLAC) and it represented them really nicely.
If I was critical, it isn't the widest soundstage you'll hear but it's pretty damn good!