Stereo Integrated Amplifier (1999)
Power output: 55 watts per channel into 8Ω (stereo)
Frequency response: 20Hz to 20kHz
Total harmonic distortion: 0.03%
Damping factor: 60
Input sensitivity: 2.5mV (MM), 150mV (line)
Signal to noise ratio: 76dB (MM), 100dB (line)
Channel separation: 50dB (line)
Output: 150mV (line)
Speaker load impedance: 4Ω to 16Ω
Dimensions: 430 x 136 x 368mm
If you have any problems opening files please read the download FAQ. All files are provided under strict licence and reproduction without prior permission or for financial gain is strictly prohibited.
If you have additional documentation please consider donating a copy to our free archive.
Technics Integrated Amplifiers
Submitted by Paul Jones
Owned mine from new. The build quality is good and its been perfectly reliable.
I do find it sounds a bit clinical in some respects, sometimes like the lift/cut of the tone controls aren't quite at the right place in the audio spectrum.
Still a good amp overall and worth considering if one comes your way at the right price!