hifi engine

Manual Library / Technics

Technics SU-V2

Stereo Integrated DC Amplifier

add a review (1 review)

Technics SU-V2


Power output: 40 watts per channel into 8Ω (stereo)

Frequency response: 5Hz to 100kHz

Total harmonic distortion: 0.02%

Damping factor: 50

Input sensitivity: 2.5mV (MM), 150mV (line)

Signal to noise ratio: 73dB (MM), 85dB (line)

Channel separation: 52dB (line)

Output: 150mV (line), 30mV (DIN)

Speaker load impedance: 4Ω to 16Ω

Dimensions: 430 x 142 x 257mm

Weight: 6.9kg


schematic   English -

If you have any problems opening files please read the download FAQ. All files are provided under strict licence and reproduction without prior permission or for financial gain is strictly prohibited.

If you have additional documentation please consider donating a copy to our free archive.


 Login or register to post reviews

Reviewed Sep 19th, 2015 by charles_rydel

Compte tenu du prix en occasion c'est un excellent intégré, le son neutre est sans colorations ni chaleurs artificielles, idéal en appartement.



re: SU-V2

Does anyone know the correct adjustment procedure after replacing STKs, thanks.

re: SU-V2

try a look at the service manual of the SU-V2A, it's a very similar device using the same STK

the value of resistor 616 its

the value of resistor 616 its not clear in the squematic can somebody give me the correct value of this resistor. thanks.

R616 = 390 ohm ( in base of

R616 = 390 ohm ( in base of Q601) (same value of R615)

This website is not affiliated with or sponsored by Technics. To purchase SU-V2 spares or accessories, please contact the company via their website or visit an authorised retailer.