hifi engine

Manual Library / Toshiba

Toshiba SA-504

Four Channel Stereo Receiver (1972)

Toshiba SA-504

Specifications

Tuning range: FM, MW

Power output: 70W/ch (stereo), 35W/ch into 8Ω (quadraphonic)

Frequency response: 10Hz to 55kHz

Total harmonic distortion: 0.4%

Damping factor: 20

Input sensitivity: 2.5mV (MM), 30mV (ceramic), 150mV (DIN), 150mV (line)

Signal to noise ratio: 65dB (MM), 70dB (ceramic), 75dB (line)

Output: 150mV (line), 30mV (DIN)

Speaker load impedance: 4Ω to 16Ω

Semiconductors: 3 x IC, 3 x FET, 75 x transistors, 34 x diodes

Dimensions: 500 x 380 x 115mm

Weight: 13kg

Year: 1972

Downloads

service manual (en) - vymyl

If you have any problems opening files please read the download FAQ. All files are provided under strict licence and reproduction without prior permission or for financial gain is strictly prohibited.

If you have additional documentation please consider donating a copy to our free archive.

Comments

re: SA-504

Purchased this receiver new in 1979. I have always enjoyed the fidelity and
frequency response produced by this receiver.
The SA504 is still going strong driving a pair of 15" speakers.

This website is not affiliated with or sponsored by Toshiba. To purchase a SA-504 please contact the company via their website or visit an authorised retailer.