Stereo Integrated Amplifier
Power output: 28 watts per channel into 8Ω (stereo)
Total harmonic distortion: 0.08%
Damping factor: 25
Input sensitivity: 2.5mV (MM), 150mV (line)
Signal to noise ratio: 72dB (MM), 92dB (line)
Output: 150mV (line)
Speaker load impedance: 4Ω to 16Ω
Dimensions: 420 x 96 x 241mm
If you have any problems opening files please read the download FAQ. All files are provided under strict licence and reproduction without prior permission or for financial gain is strictly prohibited.
If you have additional documentation please consider donating a copy to our free archive.
Reviewed May 29th, 2016 by peter1
Very Nice sounding amp and well built in metal panels and all screwed together.
No nasty output chips all proper transistor drive and output but chips are in the preamp.
Because of the low damping factor this amp is best suited to smaller speakers