Natural Sound Stereo Integrated Amplifier (1993-95)
Power output: 145 watts per channel into 8Ω (stereo)
Frequency response: 20Hz to 20kHz
Total harmonic distortion: 0.007%
Damping factor: 350
Input sensitivity: 0.16mV (MC), 2.5mV (MM), 150mV (line)
Signal to noise ratio: 75dB (MC), 92dB (MM), 110dB (line)
Channel separation: 55dB (MM), 50dB (line)
Output: 150mV (line), 1V (Pre out)
Dimensions: 435 x 171 x 448mm
Accessories: remote control transmitter
If you have any problems opening files please read the download FAQ. All files are provided under strict licence and reproduction without prior permission or for financial gain is strictly prohibited.
If you have additional documentation please consider donating a copy to our free archive.
Reviewed Oct 05th, 2015 by nassosxlvbros
A plenty of power amp,that sounds excellent too.Pure,powerfull and simple.A real bargain!
Reviewed Jul 19th, 2015 by con219
I have had this Amp for a few years now.
I use it for all my 2 channel listening playing LP's ans CD's plus SACD.
Despite it not being cosmetically appealing as the CA series it certainly makes up for it in its very natural non coloured sound.
The bass is well balanced and can go very deep. The upper frequencies are very detailed and the mid range as good as anything else I have heard.
The beauty of this Amp is the amount of headroom it has and can drive any speaker with out effort.
There is no distortion at high volumes as well.
I drive VAF I93 s11 signature series which are at 4 ohm.
I had it attached to my Duntech Sovereigns and it just performed effortlessly.
Definitely a very under rated amp and well worth the money.
Reviewed Mar 13th, 2014 by JUANFRANZ
I have this one for more than a year, with a pair of B&W 604, plays very strong and fine. 100 % satisfied !!!