hifi engine

Manual Library / Yamaha

Yamaha CA-410

Stereo Integrated Amplifier

add a review add a review

Yamaha CA-410


  • Power output: 25 watts per channel into 8Ω (stereo)

    Frequency response: 20Hz to 20kHz

    Total harmonic distortion: 0.05%

    Damping factor: 50

    Input sensitivity: 1.5mV (MM), 150mV (line)

    Signal to noise ratio: 77dB (MM), 100dB (line)

    Output: 150mV (line)

    Speaker load impedance: 4Ω (minimum)

    Semiconductors: 40 x transistors, 26 x diodes, 1 x zener diode

    Dimensions: 435 x 137 x 340mm

    Weight: 8kg

  • Power output: 40 watts per channel into 8Ω (stereo)

    Frequency response: 30Hz to 15kHz

    Total harmonic distortion: 0.01%

    Damping factor: 50

    Input sensitivity: 3mV (MM), 150mV (line)

    Signal to noise ratio: 85dB (MM), 100dB (line)

    Channel separation: 65dB (MM), 65dB (line)

    Output: 150mV (line), 30mV (DIN)

    Speaker load impedance: 4Ω to 16Ω

    Semiconductors: 45 x transistors, 23 x diodes, 2 x zener diodes, 1 x LED

    Dimensions: 435 x 139 x 333mm

    Weight: 7.8kg


schematic   English - nintz

II service manual   English - ipetrov13456

service manual   English - jhlnleu

instruction/owners manual   English - Ivy Caudieus

If you have any problems opening files please read the download FAQ. All files are provided under strict licence and reproduction without prior permission or for financial gain is strictly prohibited.

If you have additional documentation please consider donating a copy to our free archive.


re: CA-410

CA-V2 is equipped with grips.

This website is not affiliated with or sponsored by Yamaha. To purchase CA-410 spares or accessories, please contact the company via their website or visit an authorised retailer.