Stereo Integrated Amplifier
The Yamaha CA-44 is a high performance integrated amplifier, combining 25 watts per channel of output power with a full range of controls.
Ample power and lower distortion
Full range power output meters
Special low distortion low noise tone controls
Comprehensive operating controls and functions
Precise continuous volume control and full loudness compensation
Power output: 25 watts per channel into 8Ω (stereo)
Frequency response: 20Hz to 20kHz
Total harmonic distortion: 0.05%
Damping factor: 50
Input sensitivity: 2.5mV (MM), 150mV (line)
Signal to noise ratio: 77dB (MM), 100dB (line)
Channel separation: 60dB (line)
Output: 150mV (line)
Speaker load impedance: 4Ω to 16Ω
Semiconductors: 34 x transistors, 21 x diodes, 1 x zener diode
Dimensions: 435 x 137 x 350mm
If you have any problems opening files please read the download FAQ. All files are provided under strict licence and reproduction without prior permission or for financial gain is strictly prohibited.
If you have additional documentation please consider donating a copy to our free archive.