Stereo Integrated Amplifier (1978)
Power output: 40 watts per channel into 8Ω (stereo)
Frequency response: 20Hz to 20kHz
Total harmonic distortion: 0.01%
Damping factor: 50
Input sensitivity: 3mV (MM), 150mV (DIN), 150mV (line)
Signal to noise ratio: 85dB (MM), 100dB (line)
Channel separation: 65dB (MM), 65dB (line)
Output: 150mV (line), 30mV (DIN)
Speaker load impedance: 4Ω to 16Ω
Semiconductors: 45 x transistors, 23 x diodes, 2 x zener diodes, 1 x LED
Dimensions: 435 x 139 x 333mm
If you have any problems opening files please read the download FAQ. All files are provided under strict licence and reproduction without prior permission or for financial gain is strictly prohibited.
If you have additional documentation please consider donating a copy to our free archive.
Reviewed Apr 04th, 2016 by dubstepic
Without loudness there is lack of bass. But loudness is strange. It adds also trebles. Sound is very detailed but bright. Works amazingly on less bright speakers as a mordaunt short for example. Not for Focal or BW.