hifi engine

Manual Library / Yamaha

Yamaha R-V902

Audio Video Receiver

add a review add a review

Yamaha R-V902


Tuning range: FM, MW

Power output: 90 watts per channel into 8Ω (stereo)

Surround output: 90W (front), 90W (center), 35W (rear)

Frequency response: 20Hz to 20kHz

Total harmonic distortion: 0.07%

Damping factor: 80

Input sensitivity: 2.5mV (MM), 150mV (line)

Signal to noise ratio: 82dB (MM), 85dB (line)

Channel separation: 50dB (MM), 45dB (line)

Output: 150mV (line), 2.2V (Pre out)

Video Connections: composite

Dimensions: 435 x 151 x 379.5mm

Weight: 11kg

Accessories: remote control

Year: 1997


service manual   English -

If you have any problems opening files please read the download FAQ. All files are provided under strict licence and reproduction without prior permission or for financial gain is strictly prohibited.

If you have additional documentation please consider donating a copy to our free archive.


re: R-V902

Have owned this receiver for about 5 years. Bought it used for $75 and has been great. Recently, volume above half, it would shut off on me. Being that it would cost more than it's worth to fix, I bought another used receiver. This one, a Pioneer VSX-5700S. Sound-wise, there is a huge difference. The responsiveness of this Pioneer blows the Yamaha out of the water, let alone the power and clarity. That being said, the Yamaha worked well for me while it worked.

This website is not affiliated with or sponsored by Yamaha. To purchase R-V902 spares or accessories, please contact the company via their website or visit an authorised retailer.