hifi engine

Manual Library / Yamaha

Yamaha RX-E410

Stereo Receiver (2006)

add a review add a review

Yamaha RX-E410


Tuning range: FM, MW

Power output: 40 watts per channel into 6Ω (stereo)

Frequency response: 20Hz to 20kHz

Total harmonic distortion: 0.04%

Damping factor: 60

Input sensitivity: 150mV (line)

Signal to noise ratio: 93dB (line)

Channel separation: 45dB (line)

Output: 150mV (line), 2V (Pre out)

Speaker load impedance: 6Ω (minimum)

Dimensions: 215 x 108 x 382mm

Weight: 5.7kg

Finish: black, silver

Accessories: remote control

Year: 2006


service manual   English - caop

If you have any problems opening files please read the download FAQ. All files are provided under strict licence and reproduction without prior permission or for financial gain is strictly prohibited.

If you have additional documentation please consider donating a copy to our free archive.


re: RX-E410

RX-E410 and RX-E810 have the same schematics.
If they don't power up, check C8 (22nF 630V) near mains plug, very often out of service !

This website is not affiliated with or sponsored by Yamaha. To purchase RX-E410 spares or accessories, please contact the company via their website or visit an authorised retailer.