Integrated Tube Amplifier
Power output: 52 watts per channel into 8Ω (stereo)
Frequency response: 10Hz to 70kHz
Total harmonic distortion: 2%
Input sensitivity: 300mV (line)
Signal to noise ratio: 85dB (line)
Speaker load impedance: 4Ω to 8Ω
Valve complement: 4 x EL34-B, 4 x 6N1
Dimensions: 470 x 310 x 180mm
If you have any problems opening files please read the download FAQ. All files are provided under strict licence and reproduction without prior permission or for financial gain is strictly prohibited.
If you have additional documentation please consider donating a copy to our free archive.
Reviewed May 12th, 2015 by rankdick
I have this amp hooked up to my Magneplanar Smga loudspeakers and found the amp smooth and detailed. There was just enough power to drive the Maggies to a comfortable listening level without signs of distortion. One would not be aware that a tube amp was being used though, sounding like a solid state amp. I compared this to the NAD 304 and found the sound very similar. I like it.