Carver M-1.0t
Magnetic Field Power Amplifier
Description
The Carver M-1.0t magnetic field amplifier was released in June of 1986.
The original version of the amplifier had inverting outputs, that is the right channel output is inverted (180 degrees) from the left channel output.
Starting at serial number 4500 (or 70100000), the amplifier was redesigned to include a stereo/mono switch which inverts the right channel for bridged mono use.
In normal stereo operation both channels are in phase.
Specifications
Power output: 200 watts per channel into 8 ohms
Bridged mono operation: 1000 watts per channel into 8 ohms
Power at clipping: 400 watts per channel into 8 ohms
Dynamic headroom: 3.8dB
Frequency response: 20Hz to 20kHz
Total harmonic distortion: less than 0.15%
Noise: -100dB
Damping factor: greater than 9
Dimensions: 95 x 483 x 343mm
Weight: 8.6kg
Downloads
service manual (en)
Please login or register a free account to download files
To view PDF files acrobat reader 8 or newer is required.
The files are copyright the HiFi Engine and are provided under strict licence and reproduction for financial gain is strictly prohibited. This website is not affiliated with or sponsored by Carver. If you wish to buy a M-1.0t please contact the company via their website or visit an authorised retailer.