Manuals / Fisher

Fisher 400

FM Vacuum Tube Stereo Receiver with dial tuning (1964)

Description

The new Fisher 400 incorporates on a single chassis a highly sensitive FM multiplex tuner, a master audio control with a full complement of controls and features, and a dual channel, 60 watt power amplifier with ample reserve power for full room volume with any pair of loudspeakers.

Many new advances in the technology of music reproduction have been included in the 400 design.

The front end for example is of the new Fisher Golden Synchrode design, employing a specially developed RF amplifier tube combined with three tuned circuits for maximum selectivity, sensitivity and rejection of unwanted signals.

Three wideband IF stages are used, followed by a radio detector that is linear over an extremely wide range.

The multiplex converter is the superior time-division type, utilising two balanced diode bridges and a synchronous oscillator acting together as electronic switches.

The circuit reduces noise and distortion to the theoretical minimum and achieves the greatest possible stereo separation.

The famous Stereo Beam indicator signals instantly whenever a station transmits a multiplex stereo program.

Specifications

Power output: 50 watts RMS (both channels driven)

Frequency response: 25 to 25,000 Hz

Hum and noise: 80dB

Downloads

20000- service manual (en)

instruction/owners manual (en)

10001-19999 service manual (en)

48001- service manual (en)

Please login or register a free account to download files

NOTE If you are having problems opening files please post here with more details.

All files are copyright the HiFi Engine and are provided under strict licence. Reproduction without prior permission or for financial gain is strictly prohibited. This website is not affiliated with or sponsored by Fisher. If you wish to buy a 400 please contact the company via their website or visit an authorised retailer.