Quad 909

Mains powered stereo power amplifier featuring Amp bus and phono inputs - switchable. 140w RMS into 8ohms

Description

The Quad 909 is a two channel power amplifier using current dumping technology.

It weighs approximately 12kg and is built to be robust.

The performance of the 909 amplifier is as accurate as it is possible to achieve by careful design, selection of components and rigorous test procedures.

The unit has no controls other than a power switch (which is normally left on) and may be mounted out of sight in a cabinet or other convenient location.

To keep BUS connections simple you can place the unit below the 99 preamplifier.

Power amplifiers can be placed alongside or out of sight using a long 99 AMPBUS cable.

The amplifier is full compatible with the ESL-63, ESL-988 and ESL-989 loudspeakers but it should not be used with the earlier model ESL which could be damaged by signal peaks unless a protection circuit is fitted in the loudspeaker.

Review

It doesn't intrude on the music and that really is the biggest complement we can pay.

Downloads

instruction manual (en)

Login or register to download files

Please note that the PDF files are copyright the HiFi Engine and are provided under strict licence - reproduction for financial gain is strictly prohibited.

The HiFi Engine website is not affiliated with or sponsored by Quad. If you wish to buy a 909 please contact the company via their website or visit an authorised retailer. Quad is a trademark of that company.