hifi engine

Manual Library / Accuphase

Accuphase A-30

Class A Stereo Power Amplifier (2005-09)

add a review add a review

Accuphase A-30


The Accuphase A30 employs the so called instrumentation amplifier principle throughout.

The signal handling stages feature further improved MCS+ topology and the renowned circuit feedback approach.

his has resulted in electrical characteristics that surpass even the demanding standards set by its predecessors.

Employing only highest grade materials and strictly selected parts, the A30 pursues the two most important goals of an amplifier; very low output impedance and constant drive voltage.


Power output: 30 watts per channel into 8Ω (stereo), 120W into 8Ω (mono)

Frequency response: 20Hz to 20kHz

Total harmonic distortion: 0.03%

Damping factor: 150

Gain: 28 dB

Input sensitivity: 0.57V

Signal to noise ratio: 111dB

Speaker load impedance: 2Ω to 16Ω

Dimensions: 465 x 170 x 425mm

Weight: 21.5kg


Related Catalogues


If you have any problems opening files please read the download FAQ. All files are provided under strict licence and reproduction without prior permission or for financial gain is strictly prohibited.

If you have additional documentation please consider donating a copy to our free archive.


This website is not affiliated with or sponsored by Accuphase. To purchase A-30 spares or accessories, please contact the company via their website or visit an authorised retailer.