hifi engine

Manual Library / Accuphase

Accuphase P-260

Stereo Power Amplifier

add a review add a review

Accuphase P-260


The Accuphase P-260 is a highly perfected stereo power amplifier, which is the result of Accuphase's mind dedicated to eager pursuit of sound quality and of the combined aggregation of Accuphase audio technology.

MOS FETs, which are recognized as the most promising power amplifier device, are employed in the output stage. In addition to superior inherent characteristic of MOS FETs that there is no trace whatsoever of notching distortion.

Pure Class-A operation of the P-260 most strikingly exhibits its effectiveness in high grade multi-amplification systems.

For example, superior quality reproduction will immediately become apparent when it is utilized together with high efficiency horn speakers to handle amplification of the mid and high frequency range channels of such a system.

The P-260 promises highest quality reproduction with minimum sound coloration, and especially transitional distortion is effectively prevented because of these careful circuit design approach.


Power output: 130 watts per channel into 8Ω (stereo)

Frequency response: 20Hz to 20kHz

Total harmonic distortion: 0.005%

Damping factor: 120

Input sensitivity: 1.3V

Signal to noise ratio: 120dB

Speaker load impedance: 4Ω to 16Ω

Semiconductors: 16 x FET, 4 x IC, 33 x transistors, 40 x diodes

Dimensions: 445 x 160 x 390mm

Weight: 19.7kg



This website is not affiliated with or sponsored by Accuphase. To purchase P-260 spares or accessories, please contact the company via their website or visit an authorised retailer.