hifi engine

Manual Library / Accuphase

Accuphase P-3000

Stereo Power Amplifier (2004-07)

add a review add a review

Accuphase P-3000


The P-3000 is based on the same design technology as the renowned P-7000 and P-5000 models.

Using carefully selected top quality parts throughout, the P-3000 is an ideal match for the C-2000 preamplifier.

Triple parallel push-pull output stage in each channel delivers plenty of linear power even into very low load impedances; Instrumentation amplifier derived signal path design.


Power output: 75 watts per channel into 8Ω (stereo), 300W into 8Ω (mono)

Frequency response: 20Hz to 20kHz

Total harmonic distortion: 0.02%

Damping factor: 150

Gain: 28 dB

Input sensitivity: 0.98V

Signal to noise ratio: 120dB

Speaker load impedance: 2Ω to 16Ω

Dimensions: 465 x 180 x 425mm

Weight: 24kg


Related Catalogues


If you have any problems opening files please read the download FAQ. All files are provided under strict licence and reproduction without prior permission or for financial gain is strictly prohibited.

If you have additional documentation please consider donating a copy to our free archive.


This website is not affiliated with or sponsored by Accuphase. To purchase P-3000 spares or accessories, please contact the company via their website or visit an authorised retailer.