hifi engine

Manual Library / Accuphase

Accuphase T-100

Stereo FM / AM Tuner (1977)

add a review add a review

Accuphase T-100


The Accuphase T-100 uses a new advanced tuner design which includes frequency linear 5-gang FM tuning capacitor, two completely shielded double-tuned circuit stages, ideal passband that is compatible with good selectivity and use of dual gate mos-fets in the RF and mixer circuits has resulted in wide dynamic range input and greatly improved spurious signal rejection characteristics.


Type: Mono/Stereo Tuner

Tuning Bands: FM, MW

Tuning Scale: Analogue

FM Tuning Range: 88 to 108 MHz

MW Tuning Range: 535 to 1605 kHz

Sensitivity: 20uV (FM), 15uV (MW)

Signal to Noise Ratio: 70dB (FM), 50dB (MW)

Distortion: 0.5% (FM), 0.5% (MW)

Selectivity: 30dB (MW)

Frequency response: 20Hz to 15kHz (FM)

Output: 2000mV (FM), 600mV (MW)

Semiconductors: 7 x FET, 45 x transistors, 9 x IC, 43 x diodes

Dimensions: 455 x 152 x 355mm

Weight: 14kg


If you have any problems opening files please read the download FAQ. All files are provided under strict licence and reproduction without prior permission or for financial gain is strictly prohibited.

If you have additional documentation please consider donating a copy to our free archive.


This website is not affiliated with or sponsored by Accuphase. To purchase T-100 spares or accessories, please contact the company via their website or visit an authorised retailer.