hifi engine

Manual Library / Acoustic Solutions

Acoustic Solutions SP101

Stereo Integrated Amplifier

add a review add a review

Acoustic Solutions SP101

Specifications

Power output: 30 watts per channel into 8Ω (stereo)

Frequency response: 10Hz to 50kHz

Total harmonic distortion: 0.05%

Input sensitivity: 3.8mV (MM), 250mV (line)

Signal to noise ratio: 80dB (line)

Channel separation: 59dB (line)

Output: 740mV (line)

Dimensions: 430 x 230 x 80mm

Weight: 5.3kg

Downloads

Comments

re: SP101

As I see, probably Acoustic Solutions SP 101 are same or very, very similar to Tangent AMP-50 amplifier (from 2004)! In SP 100 shematic, output is integrated TDA 7296, in SP101 I don't know, in AMP-50 are transistors: 2SD1047/2SB817. If sombody know what is output of SP 101, please let me know!

re: SP101

Pre-amp - looks same
Power-end - SP100/101/103 have TDA 7296

SERVICE MANUAL

LOOKING FOR DIAGRAM OF THE ACOUSTIC SOLUTION

MOD SP101

Diagram of Acoustic Solution Mod SP101

Hi

I wondered if you had been successful in getting the above diagram and if so could I obtain a copy?

The acoustic solution sp101 manual

Thanks JACKSPRAT! You made things much easier for me. Only thing is I still need a IR Remote for this model.Looked everywhere.Have you any ideas?

This website is not affiliated with or sponsored by Acoustic Solutions. To purchase SP101 spares or accessories, please contact the company via their website or visit an authorised retailer.