hifi engine

Manual Library / ADC

ADC Sound Shaper One Ten

Stereo Frequency Equalizer

add a review add a review

ADC Sound Shaper One Ten

Specifications

Input Sensitivity: 1V

Output Level: 1V (10V max)

Gain: ± 0dB

Frequency response: 5Hz to 100kHz

Signal to Noise Ratio: 80dB

Total harmonic distortion: 0.02%

Control Range: ± 12dB

Frequency Bands: 31, 62, 125, 250, 500, 1K, 2K, 4K, 8K, 16KHz

Semiconductors: 10 x transistors, 5 x diodes, 1 x LED

Dimensions: 385 x 170 x 160mm

Weight: 5kg

Downloads

Comments

re: Sound Shaper One Ten

I have a Sound Shaper One Ten Mk II. It has illuminated slider buttons (The non Mk II model has no illumination) and the particular one I have features a lot of noise in both channels. I have replaced all the electrolytic and the noise persists.

I anyone has one and can upload a copy of the schematic which is likely in the manual, I would be eternally grateful. Ok, just for a week or so, but, you know what I mean:)

Thank you.

Rich.

This website is not affiliated with or sponsored by ADC. To purchase Sound Shaper One Ten spares or accessories, please contact the company via their website or visit an authorised retailer.