hifi engine

Manual Library / Aiwa

Aiwa AD-F660

3-Head Stereo Cassette Deck (1983-86)

add a review (2 reviews)

Aiwa AD-F660

Description

Featuring Dolby HX professional circuitry for audibly better high frequency reproduction, the AD-F660 is a superbly designed deck with the capability to handle even the most demanding digital program material with flawless fidelity.

Specifications

Type: 3-head, single compact cassette deck

Track System: 4-track, 2-channel stereo

Tape Speed: 4.8 cm/s

Heads: 1 x combination record/playback, 1 x erase

Motor: 1 x reel, 1 x capstan

Tape Type: type I, CrO2, Metal

Noise Reduction: B, C

Frequency Response: 20Hz to 20kHz  (Metal tape)

Signal to Noise Ratio: 68dB  (dolby C)

Wow and Flutter: 0.028%

Total Harmonic Distortion: 1.5%

Input: 50mV (line), 0.3mV (mic)

Output: 0.54V (line)

Semiconductors: 17 x IC, 78 x transistors, 29 x diodes, 46 x LED

Dimensions: 420 x 110 x 280mm

Weight: 5.5kg

Year: 1983

Downloads

Related Catalogues

Cassette Decks

General

HiFi

HiFi Audio Video

New Audio

Tape Deck Specs

If you have any problems opening files please read the download FAQ. All files are provided under strict licence and reproduction without prior permission or for financial gain is strictly prohibited.

If you have additional documentation please consider donating a copy to our free archive.

Reviews

 Login or register to post reviews

rating
Reviewed Oct 04th, 2019 by roberto runfola

Questo a mio avviso è uno dei migliori registratori a cassetta presenti sul mercato con una risposta di frequenza lineare fino a 20khz cosa inesistente in altre apparecchiature anche ben più costose!!

rating
Reviewed Jul 27th, 2017 by mstocker

I love this deck. Owned since 1987, this is the first service I've needed to do on it

 

Comments

Aiwa AD-F660

Hi there does any one know where you can get the drive belt sets from for this tape deck. I have tried several web sites but no concrete answer to the width or length of belt to offer!!

If any one could help I would be most gratefull and I could revive my old F660 again.

Regards

AIWA AD-F660 Belts

Hi

Got my belts for the F660 at Vintage Electronics Belt set (two belts) was about $15. Go to the site and click on Tape Deck Belts, then the AIWA tab, and you'll find them there.

Hope this helps.

Joe (luckycat)

AIWA AD-F660 belts

Hi Joe,

How difficult is it to replace the belts? I have to replace them on my AD-F990, which is more or less the same as the AD-F660 when it comes to replacing belts I guess..

Arno

re: AIWA AD-F660 belts

Hi Arno

Haven't check this site in a long time so I'm sorry for the very, very, very late reply.

Changing the belts is not hard at all and almost anyone can do it if you have some mechanical aptitude. Just need to remove the deck case to get access to the belts.

The website I used was Vintage-Electronics.net and it looks like they still sell the belts sets. About $20 for the F990.

Good luck and again, sorry for the late reply.

Joe

This website is not affiliated with or sponsored by Aiwa. To purchase AD-F660/AD-F660U spares or accessories, please contact the company via their website or visit an authorised retailer.