hifi engine

Manual Library / Aiwa

Aiwa MX-100

Stereo Integrated Amplifier (1982-83)

add a review add a review

Aiwa MX-100

Specifications

Power output: 55 watts per channel into 8Ω (stereo)

Frequency response: 5Hz to 70kHz

Total harmonic distortion: 0.05%

Damping factor: 40

Input sensitivity: 1mV (mic), 4mV (MM), 200mV (line)

Signal to noise ratio: 87dB (MM), 97dB (line)

Channel separation: 50dB (line)

Output: 150mV (line)

Semiconductors: 7 x IC, 2 x FET, 50 x transistors, 59 x diodes, 28 x LED

Dimensions: 330 x 71 x 311mm

Weight: 5.75kg

Year: 1982

Downloads

Related Catalogues

New Audio

If you have any problems opening files please read the download FAQ. All files are provided under strict licence and reproduction without prior permission or for financial gain is strictly prohibited.

If you have additional documentation please consider donating a copy to our free archive.

Comments

re: MX-100

I viewed the MX-100 and related amps to find any common circuitry to an Aiwa MX-Z200 stereo integrated amp primarily using an ASP 8801 BBE chip. The logic circuit at this point fails to pass the connected source, say CD, through to the power amp. Datasheet for the chip or the circuit for the MX-Z200 appears unobtainable making for a frustrating encounter.

This website is not affiliated with or sponsored by Aiwa. To purchase MX-100 spares or accessories, please contact the company via their website or visit an authorised retailer.