hifi engine

Manual Library / Aiwa

Aiwa SA-C22

Micro Stereo Pre-Amplifier

add a review add a review

Aiwa SA-C22


The features of the Aiwa SA-C22 include:

RIAA deviation of only +-0.2dB (20Hz to 20 kHz) and a phono S/N of 80dB

Two power supplies (plus and minus) with high performance differential amplifier ICs

No switch contacts in the input selector circuit

Muting relays to suppress the pop noise accompanying on/off power switching operations.


Frequency response: 20Hz to 20kHz

Total harmonic distortion: 0.1%

Input sensitivity: 2.5mV (MM), 150mV (line)

Signal to noise ratio: 75dB (MM), 80dB (line)

Channel separation: 48dB (MM), 45dB (line)

Output: 0.72V (Pre out)

Semiconductors: 7 x IC, 4 x transistors, 17 x diodes, 4 x LED

Dimensions: 210 x 71 x 173.5mm

Weight: 1.7kg


Related Catalogues

Mini Component Series 22

If you have any problems opening files please read the download FAQ. All files are provided under strict licence and reproduction without prior permission or for financial gain is strictly prohibited.

If you have additional documentation please consider donating a copy to our free archive.


This website is not affiliated with or sponsored by Aiwa. To purchase SA-C22 spares or accessories, please contact the company via their website or visit an authorised retailer.