hifi engine

Manual Library / Akai

Akai AA-8500

Solid State AM/FM Multiplex Stereo Tuner Amplifier

add a review (2 reviews)

Akai AA-8500

Description

The Akai AA-8500 features a new dial mechanism, FET and space developed IC, AFC on/off switch and speaker system selector.

Specifications

Tuning range: FM, MW

Power output: 65 watts per channel into 8Ω (stereo)

Frequency response: 20Hz to 50kHz

Total harmonic distortion: 0.05%

Input sensitivity: 3mV (MM), 200mV (DIN), 150mV (line)

Signal to noise ratio: 70dB (MM), 80dB (line)

Channel separation: 60dB (MM), 60dB (line)

Output: 150mV (line), 25mV (DIN)

Semiconductors: 65 x transistors, 1 x FET, 2 x IC, 29 x diodes, 1 x VC diode, 1 x tuner diode, 4 x thermistors

Dimensions: 487 x 165 x 346mm

Weight: 16kg

Downloads

Related Catalogues

Pride In Quality

If you have any problems opening files please read the download FAQ. All files are provided under strict licence and reproduction without prior permission or for financial gain is strictly prohibited.

If you have additional documentation please consider donating a copy to our free archive.

Reviews

 Login or register to post reviews

rating
Reviewed Sep 01st, 2018 by Docfletcher

1971 Beauty. Nice tuner section. Beefy power @ 65RMS into 8 ohm. If you are lucky enough to get one plan on recapping or it won't sound right.

rating
Reviewed Aug 30th, 2018 by Arema00

This amp was well built with multi voltage 110v-240v. Sounding pretty strong & solid with JBL 4410a, also good with Pioneer HPM100 (with more music instruments and more treble) For smaller room, you may need to try with Bose AM-5.
This 1970's amp but sounding like high class amplifier today

 

Comments

This website is not affiliated with or sponsored by Akai. To purchase AA-8500 spares or accessories, please contact the company via their website or visit an authorised retailer.