hifi engine

Manual Library / Akai

Akai GX-230

Stereo Reel To Reel Tape Recorder

add a review add a review

Akai GX-230

Specifications

Track system: auto reverse, 4-track, 2-channel, stereo/monaural system

Heads: 2 x playback, 1 x record/erase

Motor: 2 x reel, 1 x capstan

Reel size: up to 7 inch reel

Tape speeds: 3 34  7 12 ips

Wow and flutter: 0.07% (7 12 ips)

Frequency response: 30Hz to 23kHz (7 12 ips)

Signal to Noise Ratio: 60dB

Total harmonic distortion: 1%

Input: 70mV (line), 0.3mV (mic)

Output: 0.775V (line)

Output power: 7 watts

Semiconductors: 2 x IC, 41 x transistors, 32 x diodes

Dimensions: 440 x 395 x 205mm

Weight: 16.7kg

Downloads

Comments

re: GX-230

Thank you for the manuals! Are very useful. I have a vintage reel tape (GX-230D) and I look for a platin for the switchs on the left side (Eaualizer P. C. Board MY5014). It fails! I only have the three switches but I don`t know how to conjunct the free cables without the failing platine. Does someboddy have such platine or a very damaged AKAI GX 230 D which contains this platine?
I would be very happy if I could reanimate this wonderful machine.

Cheers,

W. Waveman

This website is not affiliated with or sponsored by Akai. To purchase GX-230 spares or accessories, please contact the company via their website or visit an authorised retailer.