hifi engine

Manual Library / Akai

Akai X-360D

Professional Stereo Tape Deck

add a review add a review

Akai X-360D

Specifications

Track system: auto reverse, 4-track, 2-channel, stereo/monaural system

Heads: 1 x record, 1 x playback, 1 x erase, 1 x bias

Motor: 2 x reel drive, 1 x capstan

Tape speeds: 1 78  3 34  7 12  15 ips

Wow and flutter: 0.04% (7 12 ips)

Frequency response: 30Hz to 18kHz (7 12 ips)

Signal to Noise Ratio: 50dB

Total harmonic distortion: 1.5%

Input: 50mV (line), 5mV (DIN), 0.5mV (mic)

Output: 1.23V (line), 0.4V (DIN)

Semiconductors: 44 x transistors

Dimensions: 444 x 406 x 254mm

Weight: 25kg

Finish: fine oil finish wood

Accessories: 1 x 7" metal reel, 1 x 15ips adaptor kit, 2 x felt pad, 1 x silicon oil

Downloads

Comments

re: X-360D

Help, help I just purchased an Akai X-360D from estate and I can not get the record button to go in. The lock/unlock mechanism remains near record and will not move to lock.

Thanks

re: X-360D

Hi, does anyone know if replacement felt pads are available and what type of silicon oil should be used? This is for the 'tape cleaner' on the left of tape path prior to reaching heads (I have the x-5000 but it looks like the same set up). Thanks

This website is not affiliated with or sponsored by Akai. To purchase X-360D spares or accessories, please contact the company via their website or visit an authorised retailer.