hifi engine

Manual Library / Audinac

Audinac AT1000

Stereo Integrated Amplifier

add a review add a review

Audinac AT1000

Specifications

Power output: 38 watts per channel into 8Ω (stereo)

Frequency response: 7Hz to 45kHz

Total harmonic distortion: 0.1%

Input sensitivity: 2.7mV (MM), 50mV (ceramic), 150mV (DIN), 60mV (line)

Signal to noise ratio: 80dB (MM), 85dB (line)

Output: 150mV (line)

Speaker load impedance: 4Ω to 16Ω

Semiconductors: 36 x transistors, 19 x diodes, 2 x zener diodes

Dimensions: 482 x 140 x 315mm

Weight: 9.7kg

Downloads

Comments

This website is not affiliated with or sponsored by Audinac. To purchase AT1000 spares or accessories, please contact the company via their website or visit an authorised retailer.