Audinac AT510
Stereo Integrated Amplifier

Specifications
Power output: 25 watts per channel into 8Ω (stereo)
Frequency response: 10Hz to 35kHz
Total harmonic distortion: 0.09%
Input sensitivity: 5mV (MM), 100mV (ceramic), 75mV (line)
Signal to noise ratio: 80dB (line)
Output: 75mV (line), 0.6V (Pre out)
Speaker load impedance: 4Ω to 16Ω
Semiconductors: 26 x transistors, 8 x diodes
Dimensions: 428 x 145 x 300mm
Weight: 8.15kg
re: AT510
Las fotos de la galeria corresponden al modelo CX2000 Valvular
re: AT510
Hi, i want to add just a little comment, this amp delivers 25wrms by side.Its a very good amplifier.